Şirket Blog About Mingjiada Supply NXP MIMXRT1052 Crossover MCU, The Arm Cortex-M7 Core Enables High-Performance Real-Time Control And HMI Design

Mingjiada Supply NXP MIMXRT1052 Crossover MCU, The Arm Cortex-M7 Core Enables High-Performance Real-Time Control And HMI Design

The NXP i.MX RT1050 is the industry’s first ‘Crossover MCU’ launched by NXP, combining application processor-level performance and high integration with the ease of use and real-time responsiveness of a microcontroller. The MIMXRT1052 model in the i.MX RT1050 series is based on the Arm® Cortex®-M7 core, operates at a maximum frequency of 600 MHz, delivers 3,020 CoreMark / 1,284 DMIPS, and is equipped with up to 512 KB of on-chip SRAM configurable as TCM, a PXP 2D graphics acceleration engine and a wealth of external memory interfaces. Mingjiada Electronics has been supplying the full range of part numbers, including MIMXRT1052CVL5B, MIMXRT1052DVL6B and MIMXRT1052CVL5A, for a long time, and supports both sample procurement and bulk orders.

Product Overview
The MIMXRT1052 belongs to NXP’s i.MX RT1050 cross-over MCU series, featuring an Arm Cortex-M7 core, and is designed for embedded systems requiring high real-time performance, substantial computing power and a wide range of connectivity peripherals. The term ‘crossover MCU’ refers to devices that, whilst retaining MCU development conventions, real-time responsiveness and low-power characteristics, incorporate higher clock speeds and greater processing power to cover certain traditional MPU application scenarios.
The i.MX RT1050 series typically features high operating frequencies, large on-chip RAM, external memory interfaces, and peripheral resources such as LCD displays, Ethernet, USB and CAN, making it suitable for building end devices with display interaction, communication connectivity and real-time control.

MIMXRT1052 Core Specifications at a Glance:
Core: Arm Cortex-M7, 32-bit single-core, up to 600 MHz (528 MHz for CVL5x part numbers), with FPU, dual-issue superscalar architecture
Performance benchmarks: 3020 CoreMark / 1284 DMIPS @ 600 MHz
Cache: 32 KB instruction cache + 32 KB data cache
On-chip RAM: 512 KB SRAM (OCRAM), configurable as TCM; plus 96 KB Boot ROM
Real-time response: Minimum interrupt latency of 20 ns
Supply voltage: VDD_SOC 3.0–3.6 V
Display Interface: 8/16/24-bit parallel RGB LCD, up to WXGA 1366×768, with a 256-entry × 24-bit colour lookup table
Camera: 8/16-bit parallel CSI (Camera Sensor Interface)
Audio: 3×SAI (supporting I²S, AC97, TDM) + SPDIF transceiver + MQS
Connectivity: 2×USB 2.0 OTG (on-chip PHY), 1×10/100 Ethernet (IEEE 1588), 2×FlexCAN, 8×UART, 4×I²C, 4×SPI, FlexIO
Motors and Control: 4×FlexPWM (up to 8 channels per channel), 4×quadrature encoders, 4×four-channel timers, 2×12-bit ADCs (up to 20 channels), 4×analogue comparators, touchscreen controller (TSC)
Operating Temperature: Industrial-grade junction temperature –40°C to +105°C; Consumer-grade 0°C to +95°C

MIMXRT1052 Key Features:
High-performance Cortex-M7 core
3020 CoreMark/1284 DMIPS @ 600 MHz
Up to 512 kB tightly coupled memory (TCM)
MCUXpresso SDK includes support for FreeRTOS
Real-time, low-latency response as low as 20 ns
Industry’s lowest dynamic power consumption via integrated DC-DC converter
Operating frequency of 24 MHz in low-power mode
Advanced multimedia for GUIs and enhanced HMIs
2D graphics acceleration engine
Parallel camera sensor interface
LCD display controller (up to WXGA 1366x768)
3 I2S interfaces for high-performance multi-channel audio
Extensive external storage interface options
NAND, eMMC, QuadSPI NOR Flash and Parallel NOR Flash
Wireless connectivity interfaces: Wi-Fi®, Bluetooth®, Bluetooth Low Energy, ZigBee® and Thread™

Typical Applications for the MIMXRT1052 (i.MX RT1050)
Industrial Human-Machine Interfaces (HMI), PLCs, factory automation, test and measurement equipment
Motor control, servo drives, 3D printers, drone flight control systems, small robots
IoT edge gateways, smart meters, photovoltaic control, building automation, HVAC
Embedded vision, image capture terminals, smart cameras
High-end audio equipment, voice interaction terminals, smart home appliances

As embedded devices place ever-increasing demands on real-time performance, computing power and connectivity, the applications of cross-domain MCUs continue to expand across the industrial, IoT and consumer electronics sectors. The MIMXRT1052 from NXP’s i.MX RT1050 series, with its Arm Cortex-M7 core and extensive peripheral resources, offers a noteworthy solution for high-performance real-time control and HMI design. Mingjiada Electronics will continue to mai

ntain stock of relevant NXP microcontrollers and processors to help customers shorten their product selection and procurement cycles.

For further information on the [NXP] MIMXRT1052: High-Performance Cortex-M7 Core i.MX RT1050 Cross-Domain MCU, or to enquire about sample prices, please visit the Mingjiada Electronics website (https://www.integrated-ic.com/) for further supply details.
Tags: MIMXRT1052CVL5B, MIMXRT1052CVL5, MIMXRT1052CVL, MIMXRT1052CV, MIMXRT1052C, MIMXRT1052